Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Rear Bumper on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial video, you will learn how to fit the rear bumper on a Ford Fiesta. First, position the bumper correctly and slot it in place from the sides: then adjust all the side seals present in the boot area and screw in the bumper screws near the lights and also the screws found on the wings, on both sides.

At this point, the bumper is securely fixed; now check that the bumper is perfectly aligned by verifying the gap between the boot lid and the bumper.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Fit a Front Bumper on Ford Fiesta
How to Fit a Front Bumper on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to fit a front bumper on Ford Fiesta? Follow these steps; it’s not too complex if done in order. First, grab the bumper and position it perfectly…
How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Learn how to remove the rear light of a Ford Fiesta. In this video, see how to dismantle the reflector light. Open the compartment under the light, s…
How to Remove the Diffuser from the Rear Bumper on Ford Fiesta
How to Remove the Diffuser from the Rear Bumper on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Watch this video to learn how to remove the fake diffuser from the rear bumper on a Ford Fiesta: lift the vehicle with a jack and secure it. Use a pl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos