Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Front Bumper on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

How to fit a front bumper on Ford Fiesta? Follow these steps; it’s not too complex if done in order. First, grab the bumper and position it perfectly on the vehicle body, then use a socket to screw in the securing bolts at the front of the bumper.

Next, start tightening the bolts around the wheel arch liners (move the wheels left and right for easier access). After securing the bolts around the bumper, tighten the bolts underneath the car, between the chassis and the bumper.

Finally, check the correct fitting of the bumper in all its parts.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Install the Front Bumper of a Ford Fiesta
How to Install the Front Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How do you install the front bumper of a Ford Fiesta? Let's see how to proceed, a task not too complex if done methodically. Take the bumper and posi…
How to Fit the Front Bumper on a Ford Fiesta
How to Fit the Front Bumper on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) How to fit the front bumper on a Ford Fiesta? Follow these steps for a straightforward operation. First, hold the bumper and position it perfectly ag…
Removing the Bumper from the Ford Fiesta
Removing the Bumper from the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the front bumper from the Ford Fiesta? Begin by lifting the front bonnet and unscrewing the screws from the front grille: remove it fro…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos