Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Reflector on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Rear bumper

Is the reflector on your Ford Fiesta damaged? Here’s how to remove it. Open the compartment where the reflector is mounted, specifically at the rear of the bumper, and using a screwdriver, detach the plastic rivets above the splash guard. Unscrew the retaining screws of the reflector. Once the piece is free from any constraints, detach it from the bumper. Fit the new reflector, screw in the retaining screws in the bumper. Close the inspection compartment of the bumper with the splash guard plastic. Remove and replace the opposite reflector if damaged.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Reflector Lamp on the Ford Fiesta?
How to Remove the Rear Reflector Lamp on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, you will see how to remove the small rear reflector lamp of the Ford Fiesta MK6. First, use a Torx key to remove the lower screw of…
How to Replace the Rear Fog Light on a Ford Fiesta
How to Replace the Rear Fog Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this short and simple guide, learn how to remove and replace the reflector or rear fog light on a Ford Fiesta. To access the fog light on the rear…
How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Learn how to remove the rear light of a Ford Fiesta. In this video, see how to dismantle the reflector light. Open the compartment under the light, s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos