Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the rear fog light on a Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Fog lights
Operation: How to replace the rear fog light on a Ford Fiesta

In this short and simple guide we will see how to disassemble and replace the Ford Fiesta rear reflector or fog light. In order to access the rear bumper fog light, the rear wheel must first be removed; we then unscrew the wheel arch screws to access it, as shown in the video. Now let's remove the fog light bulb, replacing it with the new one if necessary; therefore also release the reflector and replace it with the new one, fixing it correctly on the rear bumper, applying the reverse procedure for reassembly!


Posted on 23 December 2022 by ScegliAuto



How to replace the front fog light bulb of a Ford Fiesta.
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) Below we will see the guide that will allow us to disassemble and replace the front fog light bulb of the Ford Fiesta. First, let's move to the front
How do you replace the fog light on a Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In order to replace the fog light on the Ford Fiesta it is necessary to completely disassemble the front bumper, unscrewing all the screws that fix i
Where are the controls for the fog lights in the Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this tutorial we can see where the Ford Fiesta fog lamp controls are and how to activate them. As shown, the switch is located on the driver's sid

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos