Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dashboard Bulbs on Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Instrument panel light

In this video, you will learn how to replace the bulbs in the dashboard of the Ford Focus. First, unscrew the screws with a cross-head screwdriver located at the top of the dashboard of your instrument cluster; then remove the upper plastic cover. Now, in front of you, there will be two screws to unscrew that hold the instrument cluster in place: extract the cluster. Open it and change the internal bulbs. It is advisable to use high-quality bulbs to extend the lifespan and increase the brightness of the instrument cluster (also to avoid disassembling the cluster every time).

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulbs on Ford Focus
Replacing Front Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlamp bulbs on your Ford Focus blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the da…
Replacing Rear Bulbs on a Ford Focus
Replacing Rear Bulbs on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's look at replacing the bulbs in the rear light of a Ford Focus. Open the tailgate to access the rear light, unscrew the securing screws on eithe…
Instructions for Replacing Instrument Cluster Bulbs in Ford Focus MK1
Instructions for Replacing Instrument Cluster Bulbs in Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In this video, we will see the main steps to disassemble and replace the bulbs in the instrument cluster of a Ford Focus MK1 in simple steps. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos