Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aftermarket H7 Xenon Kit

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Headlight

First, open the bonnet, ensuring it remains safely open. Unscrew the fixing screws of the front headlamp and pull it forward to remove it from its housing. Remove the protective cap from the bulb holder and unclip the original bulb to replace it with the one from the xenon kit. Drill a hole in the cap of the bulb holder to allow the new bulb's cables to pass through, ensuring the grommet is correctly attached. Repeat the same operation on the other headlamp and complete the connections of the power unit following the attached diagram, taking care to position the cables and unit properly to avoid contact with hot and moving parts.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Window Regulator Mechanism
Replacing the Window Regulator Mechanism
Ford Mondeo / Fusion (1993-2000 / MK 1) To replace the window regulator mechanism, you first need to remove the door panel. Remove the cap inside the trim around the internal opening handle…
Installation of DAB Interface on Original Stereo
Installation of DAB Interface on Original Stereo
Ford Mondeo / Fusion (2007-2014 / MK 3) Digital radio, also known as DAB (Digital Audio Broadcasting), is a worldwide standardised procedure for transmitting radio signals in digital format…
How to Replace the Timing Belt on a Ford Mondeo 2.0 TDCi
How to Replace the Timing Belt on a Ford Mondeo 2.0 TDCi
Ford Mondeo / Fusion (2014-2021 / MK 4) Today, we will go through the steps to remove and replace the timing belt on a Ford Mondeo 2.0 TDCi. First, open the vehicle's bonnet and begin remov…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos