Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Regulator Mechanism

Model: Ford Mondeo / Fusion MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Door trim panel

See other generations:
Video tutorial

To replace the window regulator mechanism, you first need to remove the door panel. Remove the cap inside the trim around the internal opening handle, unscrew the screw underneath, and take off both the window switch and the trim itself.

Remove the other protective caps over the screws and unscrew them. Detach the plastic trim triangle behind the external rear-view mirror and the support for the mirror adjustment mechanism.

Remove the handle grip trim and unscrew the underlying screws to complete the door panel removal, then peel off the soundproofing material. At this point, you can access the window regulator mechanism and disassemble it, starting by loosening the clips holding the glass to remove it. Continue with the fastening pins of the mechanism and extract it complete with the motor, then proceed in reverse with the installation of the new one: if the motor power connector is different, replace it with the one included in the kit.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Window Regulator Mechanism Replacement
Ford Mondeo / Fusion (1993-2000 / MK 1) To replace the window regulator mechanism, first remove the door panel: take off the cap at the centre of the trim around the internal opening lever,…
Replacement of Indicator Bulb in External Wing Mirror
Replacement of Indicator Bulb in External Wing Mirror
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the bulb in the external wing mirror does not require removing the mirror from the vehicle. Adjust the wing mirror to its maximum tilt. Car…
How to Replace the Indicator Bulb on Ford Mondeo
How to Replace the Indicator Bulb on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the front headlight and indicator bulb is a simple and quick task that can be done independently on a Ford Mondeo. To replace it, open the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos