Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Handle on Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Handle

Remove the damaged handle mounted on the door of a Ford Mondeo. Take off the cover cap on the side of the door (as shown in the video). Unscrew the screw inside the door and remove the handle cover on the side. Once you have extracted the side part of the handle, simply pull the handle out. After removing the handle, fit the new piece. Insert the new handle into the door and tighten the retaining screws and cover caps. Operate the handle and test its functionality.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Door Panel from Ford Mondeo
Removing Rear Door Panel from Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) In this video tutorial, you will see how to remove the rear door panel of a third generation Ford Mondeo. First, open the rear door and use a plastic…
How to Open the Door of a Ford Mondeo with a Flat Battery?
How to Open the Door of a Ford Mondeo with a Flat Battery?
Ford Mondeo / Fusion (2014-2021 / MK 4) Before you can start, open the physical key of your Ford Mondeo by pressing the button located on the top section of the electronic key. Next, insert…
Disassembly of the front door panel of the Ford Mondeo
Disassembly of the front door panel of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Today we will discover the instructions that will allow us to dismantle the front door panel of the Ford Mondeo. First, we open the front door and st…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos