Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Indicator Bulb in External Wing Mirror

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Side marker bulb

See other generations:
Video tutorial

Replacing the bulb in the external wing mirror does not require removing the mirror from the vehicle. Adjust the wing mirror to its maximum tilt.

Carefully push the light unit outwards with a plastic tool, taking care with the internal wiring that needs to be gently removed. Disconnect the wire by acting on the connector and remove the light unit.

Replace the burnt-out bulb and refit the light unit by reversing the previous steps. Ensure the supports are correctly positioned in their respective housings.

Check that the mirror adjustment mechanism still functions correctly.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Bulb on Ford Mondeo
How to Replace the Indicator Bulb on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Replacing the front headlight and indicator bulb is a simple and quick task that can be done independently on a Ford Mondeo. To replace it, open the …
Window Regulator Mechanism Replacement
Ford Mondeo / Fusion (1993-2000 / MK 1) To replace the window regulator mechanism, first remove the door panel: take off the cap at the centre of the trim around the internal opening lever,…
Complete Removal of Front Headlamp
Complete Removal of Front Headlamp
Ford Mondeo / Fusion (2007-2014 / MK 3) To completely remove the front headlamp assembly, open the bonnet and remove the two screws that secure the headlamp. Carefully pull the headlamp ass…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos