Window Regulator Mechanism Replacement

Model: Ford Mondeo / Fusion MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Power window motor

See other generations:

1993-2000 (MK 1)

This video is currently unavailable

To replace the window regulator mechanism, first remove the door panel: take off the cap at the centre of the trim around the internal opening lever, unscrew the screw underneath, and remove the trim itself; move on to the screws along the outer edge of the panel and the bottom one, then remove the handle cover at the centre of the panel and take it off; once the panel is removed, detach the external rear-view mirror; at this point, lower the window until you reach the clips securing the glass to loosen and remove the glass itself; now you can remove the complete window regulator mechanism with the motor and proceed in reverse for the installation of the new one, replacing the motor's power connector.

Updated on 17 February 2026 by ScegliAuto

Other guides you may be interested in

Handle - Maintenance and repair on other vehicles

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!

by ScegliAuto

Window Regulator Mechanism Replacement

Related tutorials

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

More videos