Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of a Side Indicator Light and Bulb

Model: Ford Ranger MK 2 - Years 1993-1997
Part: Side marker light

This video explains how to replace the front side indicator light and its bulb on a Ford Ranger. Using a 19 mm ratchet spanner, remove the bolt that secures the light from the inside, and using your fingers, extract the light itself. Twist it gently to detach it from the bulb, and if necessary, replace the bulb. Take a new light, insert the new bulb into it before positioning it, and then restore the connection. Now reposition the light by pushing it in with your hands, ensuring its clips engage. Finally, re-tighten the bolt that secures the light from the inside.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the turn signals on the external rearview mirror of the Ford Ranger
How to replace the turn signals on the external rearview mirror of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Today we will explain how to replace the turn signal bulb of the Ford Ranger T6 model. Press on the mirror to push it upwards in order to remove the …
Replacement of Rear Headlamp Bulb
Replacement of Rear Headlamp Bulb
Ford Ranger (1993-1997 / MK 2) Remove the fixing screws of the rear lamp, located at the top of the driver's cabin, disconnect the connector attached to it and connect it to the ne…
Installation of Front Grille and Chrome Trim
Installation of Front Grille and Chrome Trim
Ford Ranger (1993-1997 / MK 2) Open the front bonnet, unscrew the fixing screws along the edge of the grille and remove the front mask (grille). Proceed to remove the indicator lig…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos