Do it yourself
Frequently asked questions about cars and motorcycles

Change Engine Oil on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Engine oil

Changing the oil on a Ford Focus? Let's look at the oil replacement process. Open the car's door and pull the lever to open the engine compartment located at the bottom left of the dashboard, then lift the bonnet and secure it. Raise the car on a jack and unscrew the bolt from the oil sump, allowing the fluid to drain into a container. Using a strap wrench, unscrew the large securing bolt of the container cap where the oil filter is located, remove the worn oil filter, and install a new one. Top up the new oil in the engine and close the cap.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) In a few simple steps, we will replace the engine oil and oil filter, performing the routine maintenance of the Ford Focus. First, we lift the vehicl…
Ford Focus (2011-2018 / MK 3) Perform an oil change on a Ford Focus. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard…
Ford Focus (2011-2018 / MK 3) The oil light comes on in a 2013 Ford Focus when it is necessary to top up or replace the engine oil in the tank. After performing this operation, it…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos