Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : How to change the tablets of the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Brake pads
Operation: How to change the tablets of the Ford Focus

Change the tablets of the Foed Focus? Let's disassemble the wheel and the tablets, let's see. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. We remove the pads from the wheel hub caliper with a screwdriver, then mount the new pads on the brake caliper. We mount the brake caliper with the support on the brake disc, tighten all the pins and mount the wheel at the end of the replacement. We replace the brake pads of the other brake discs. We test the operation of the caliper and its braking. We top up the brake reservoir with oil.


Posted on 14 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos