Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror on Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Side mirror

See other generations:
Video tutorial

Is the rear-view mirror on the Fiesta broken? Here’s how to replace the external mirror. Unscrew the screw on the internal plastic cover, detach the mirror adjustment lever, then unscrew the securing bolt.

Use a lever to remove the internal cover part of the mirror (there are plastic clips). Once the cover piece is removed, unscrew the securing screw of the mirror.

Remove the door panel to unscrew the other screw (located under the panel). Detach the mirror with the glass adjustment cables from the car door.

Fit the mirror with the screws, the adjustment cables, and the plastic cover into the door skin.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to replace the exterior rearview mirror of the Ford Fiesta.
How to replace the exterior rearview mirror of the Ford Fiesta.
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Below we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Ford Fiesta. First, let's open t…
How to Replace the External Wing Mirror on the Ford Fiesta
How to Replace the External Wing Mirror on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) This guide provides instructions on how to remove and replace the external wing mirror on the Ford Fiesta in simple steps. First, open the front door…
How to Replace the External Wing Mirror on the Ford Fiesta?
How to Replace the External Wing Mirror on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To replace the external wing mirror on the Ford Fiesta, loosen all the screws securing the corresponding door panel so that it can be removed. The sc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos