Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard and Stereo Removal

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Dashboard

Using a plastic tool to avoid damaging the bodywork, lever at the sides of the dashboard cover to release the plastic clips and remove it. Still using a plastic tool, lever at the sides of the console panel and then remove it to access the screws holding the stereo. Unscrew the stereo mounting screws to completely withdraw the stereo from its housing. Carefully remove the stereo by lifting it to allow disconnection of the connectors located at the back. Install the new stereo by reversing the previous steps.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Vents from a Ford Fiesta
Removing the Air Vents from a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Remove the air vents from a Ford Fiesta. Follow this guide to proceed with the removal. Use a plastic lever to detach the upper and lower trims of th…
How to Remove the Dashboard of the Ford Fiesta
How to Remove the Dashboard of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Remove the upper plastic trim above the stereo using a suitable lever. Then, unscrew the screws located inside the dashboard. Remove the front part o…
How to Remove the Original Stereo on Ford Fiesta
How to Remove the Original Stereo on Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) How to remove the original stereo from your Ford Fiesta? Follow these guidelines carefully in the video. Use the original or aftermarket metal keys t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos