Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlight Bulb

Model: Ford Focus MK 1 - Years 1998-2004
Part: Headlight bulb

Starting from the passenger side headlight, unclip the protective cap of the lens by turning it anti-clockwise, unclip the retaining springs of the bulb (H4 fitting) and the connector attached to it. Insert the new bulb, ensuring it is correctly seated in its housing, reclip the retaining springs, connect the power plug, and refit the cap by turning it clockwise. To replace the bulb on the driver’s side headlight, it is necessary to remove the battery for easier access to the bulb holder: once removed, proceed as described above.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Front Headlamp Bulb on Ford Focus II
Replacing Front Headlamp Bulb on Ford Focus II
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the front headlamp bulb (H7 fitting), you need to remove the headlamp itself. This is a straightforward process as the headlamp is secured…
How to Replace the Front Headlight Bulbs of a Ford Focus
How to Replace the Front Headlight Bulbs of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to replace the front headlight bulbs of a Ford Focus. Open the bonnet by pulling the lever located at the bottom right of the dashboard…
Replacing Front Headlight Bulb on Ford Focus MK1
Replacing Front Headlight Bulb on Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In today's video, follow the instructions to remove and replace the front headlight bulb on a first-generation Ford Focus. First, open the bonnet of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos