Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Half Shaft from Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Axle shaft

In this tutorial video, you will learn how to remove the front half shaft from a Ford Fiesta, specifically the ST model. First, secure the car and lift the front end with a jack: then remove the wheel by unscrewing its bolts. Next, remove the central hub nut using a socket wrench, and unscrew the nut that connects the half shaft to the braking system: then separate the arm and remove the braking system from the half shaft. Now, detach the half shaft and clean everything up as illustrated in the video!

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the CV Boot of the Ford Fiesta?
How to Replace the CV Boot of the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the CV boot of the Ford Fiesta, lift the corresponding wheel with a jack so that it is not in contact with the ground: then unscrew the bo…
Removing the Air Vent on Ford Fiesta
Removing the Air Vent on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Let's remove the air vent from a Ford Fiesta. Enter the vehicle, and using a plastic or metal spatula, pry upwards (levering) the plastic air vent lo…
How to Replace the Front Wheel Bearing on a Ford Fiesta
How to Replace the Front Wheel Bearing on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This video tutorial outlines the steps to remove and replace the front wheel bearing on a Ford Fiesta. First, lift the vehicle and remove the front w…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos