Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the CV Boot of the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: CV boot

See other generations:
Video tutorial

To replace the CV boot of the Ford Fiesta, lift the corresponding wheel with a jack so that it is not in contact with the ground: then unscrew the bolts securing it, removing the wheel to access the components at the rear. Here, loosen the bolt securing the CV joint at the bottom of the suspension: by moving the end of the CV joint, you can slide off the old boot and replace it with a new one. After the replacement, reassemble the CV joint and the corresponding wheel.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Remove the Boot Tailgate of the Ford Fiesta
How to Remove the Boot Tailgate of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today, you will see the instructions to remove and detach the boot tailgate of the Ford Fiesta. First, open the boot lid and start disconnecting the …
Replacing the Boot Gas Struts on a Ford Fiesta
Replacing the Boot Gas Struts on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, learn how to remove and replace the gas struts for the boot lid of a fifth-generation Ford Fiesta, following these simple ins…
Replacing the Rear Boot Solenoid on a Ford Fiesta Mk6
Replacing the Rear Boot Solenoid on a Ford Fiesta Mk6
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will see how to remove and replace the solenoid or actuator for the rear boot lock on a sixth series Ford Fiesta. First, …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos