Do it yourself
| ||||
|
Ford Fiesta - Video tutorial
Model: Ford Fiesta
MK VI, Fiesta 6, MK 6
- Years 2008-2017 The tutorial starts with the seat disassembled and removed from the car. By placing the seat on two trestles or on a workbench, remove the rear part of the seat by first detaching the two lower lateral plastics, as shown in the video. Now you can remove the backrest by inserting a flat screwdriver into the joint present at the end of the same, and levering it. Once you have reached the top of the seat, stop and start disassembly by removing the seat adjustment handle and inserting the screwdriver to widen the tab. Remove the ropes both in the upper part (pulling it off the binding), and in the lower part, freeing them from the lodgings. Remove the strings and mount the new ones, reassemble everything by working backwards. New strings cost around € 80.
Posted on 29 December 2023 by ScegliAuto
How to remove the front seat of a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will need to open the front door of our Ford Fiesta. Let's start by pulling the front seat all the way back on its tracks. After
How do you remove the front seat of the Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In order to remove the front seat of the Ford Fiesta, you need to push the seat all the way back so that the screws on the front of its sliding track
How to remove the gear knob on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will have to sit in the driver's seat of our Ford Fiesta. So let's start by going to grab the gear knob with both hands. Next, we Other guides that may interest you |
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |