Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Centre Console on Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Car stereo

To carry out this operation, you need a plastic trim tool to pry in the various gaps and remove the panels. Start from the upper area of the centre console, where the small display is located: pry from underneath and then sideways to extract it from its housing. At this point, you will have uncovered the screws that secure the radio from above: unscrew them. Detach the entire central plastic piece with the controls by pulling it from underneath with your hands and disconnect the rear connector. This is a simple operation that anyone can do, as you can see. For reassembly, proceed in reverse order.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Console on a Ford Fiesta
How to Remove the Centre Console on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today's guide will show you the instructions to remove and replace the centre console on a Ford Fiesta by following these simple steps. First, get in…
Removing the Centre Console on the Fiesta
Removing the Centre Console on the Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) You will see the removal of the centre console of a Ford Fiesta with all the associated parts. To begin, detach the protective trim around the gear l…
How to Replace the Airbag in a Ford Fiesta
How to Replace the Airbag in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) First, release the bonnet using the designated lever and lift it to disconnect the battery terminals for safety. Using an Allen key, press the button…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos