Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disconnect the Airbag Control Unit on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Control unit

See other generations:
Video tutorial

How to remove the airbag control unit from a Ford Fiesta? This operation is not straightforward; you need to remove the plastics from the centre console. Use a plastic lever to pry off the covering located at the bottom of the centre console, remove the leather gaiter of the gear lever and the knob.

After removing the plastic covering, unscrew the fastening bolts located at the rear of the centre console using a socket wrench. Pull away the centre console and disconnect any power cables.

Disconnect the battery terminals and finally unscrew the screws of the airbag control unit. Replace the unit with a new one and remove everything.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag on a Ford Fiesta
How to Remove the Airbag on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Remove the covering plastics around the steering wheel (rear). Once the plastics are removed, unlock the securing clips of the airbag. Detach the air…
How to Replace the Airbag on the 2010 Ford Fiesta
How to Replace the Airbag on the 2010 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To disassemble and replace the old airbag on the Ford Fiesta yourself, first disconnect the battery terminals to avoid the possibility of a short cir…
Removing the ECU from a Ford Fiesta
Removing the ECU from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's tutorial video, you will learn how to remove the internal ECU from a Ford Fiesta. First, open the bonnet of the car and disconnect the two…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos