Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan Resistor on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Blower motor

Are you having issues with the ventilation fan? Learn how to remove the fan resistor on a Fiesta. Open the car door and remove the trim plastics from the centre tunnel (fan resistor). Detach the cover located at the bottom right of the centre tunnel: remove the cap, then access the fan resistor. Once the damaged part is removed, simply fit a new one. Secure the cover cap of the centre tunnel and tighten the screws. Check the proper functioning of the ventilation fan.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Fan Resistor from a Ford Fiesta
How to Remove the Cabin Fan Resistor from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide will help you remove and replace the cabin fan resistor on a Ford Fiesta. First, get inside the vehicle and remove the plastic cover locat…
How to replace the cabin fan resistor of the Ford Fiesta
How to replace the cabin fan resistor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…
How to Replace the Fan Resistor on a Ford Fiesta
How to Replace the Fan Resistor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here’s how to replace the fan resistor on a Ford Fiesta. Follow these steps to remove the part: use a lever to remove the plastics under the centre t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos