Do it yourself
Frequently asked questions about cars and motorcycles

Draining Coolant on Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Radiator

On Ford Focus models from 1998 to 2004, there are not many points from which to drain the coolant. The only "good" point is located, as shown in the video, on the left side of the vehicle: so raise the car with a jack and locate the mentioned bolt shown in the video, which is obviously connected to the radiator. Unscrew it with an 8 mm Allen key and insert a hose to direct the fluid into your chosen container. It will take about 10-15 minutes for complete drainage. For proper cleaning of the radiator circuit, it is recommended to fill the circuit with plain water and drain it a second time.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2011-2018 / MK 3) In this tutorial we can see how to replace the coolant in the Ford Focus, an extremely simple and quick operation. First of all, we wait for the engi…
Ford Focus (2011-2018 / MK 3) In this video we can see where the coolant temperature sensor is located in the Ford Focus and how to proceed in case we need to replace it. As shown…
Ford Focus (2011-2018 / MK 3) Top up the radiator reservoir of the Ford Focus with the specified coolant. Here's how. Pull the plastic lever located at the bottom left of the dash…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos