Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Topping Up the Radiator Reservoir on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

Top up the radiator reservoir of the Ford Focus with the specified coolant. Here's how. Pull the plastic lever located at the bottom left of the dashboard, lift the front bonnet, and secure it with the metal prop. Next, locate the cap for topping up the windscreen washer fluid (remove it). Use a funnel to add the coolant and replace the reservoir cap (screw it on). Close the engine cover after topping up. Close the front bonnet after topping up the reservoir of the Ford Focus.

Updated on 18 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Radiator Fluid on a Ford Focus
How to Replace the Radiator Fluid on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to change the radiator fluid in your car? In this guide, learn how to replace the coolant in the radiator of a Ford Focus. Lift the vehicle on a…
How to Replace the Heater Radiator on a Ford Focus
How to Replace the Heater Radiator on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the heater radiator on the Ford Focus, open the glove compartment on the passenger side to access the internal screws: by loosening these …
Replacing the Thermostat on Ford Focus
Replacing the Thermostat on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Is the thermostat on your Ford Focus due for replacement? Here’s how to replace it. Open and lift the bonnet, remove the radiator expansion tank. Uns…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos