Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headrests on Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Checks and maintenance

How to remove the headrests from the Ford Focus? Let's remove the front headrests from the car. Open the door and enter the back of the car (rear passenger seat), then: press the plastics located under the covering of the front headrest; there are round plastics around the metal bars. Raise the headrest with your hands until it detaches from the front seat back. Insert the seat cover and mount the front headrest (just follow the disassembly steps illustrated earlier). Fit the new headrests or carry out other maintenance on the seat.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headrests of the Ford Focus
How to remove the headrests of the Ford Focus
Ford Focus (2011-2018 / MK 3) In this guide, we will see the instructions that will allow us to remove the headrests of the seats of the Ford Focus. First, we open the rear door o…
How to Remove the Front Headlamp of a Ford Focus
How to Remove the Front Headlamp of a Ford Focus
Ford Focus (2011-2018 / MK 3) Before starting, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws that secure the front headlamp to the car's frame. N…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos