Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlining on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

Want to remove the headlining from a Ford Focus? Here’s how to take apart the pieces to remove the headlining. Unscrew the fastening screws of the side handles of the headlining with a screwdriver, then remove the sun visors and the overhead lighting unit located in the panel. Once all the attached pieces under the roof are removed, detach the headlining panel around the perimeter of the car's roof. Once the panel is free from clips, you can pull it out of the vehicle. Fit a new panel under the car's roof, secure the various pieces, and screw in the screws.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to Remove the Radio from Your Ford Focus
How to Remove the Radio from Your Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the radio from your Ford Focus? Not sure how to do it? Let's see in this video how to remove the original stereo: remove the trim aroun…
How to Remove the Original Stereo on a Ford Focus
How to Remove the Original Stereo on a Ford Focus
Ford Focus (1998-2004 / MK 1) How to remove the original stereo on a Ford Focus? Follow these guidelines for the removal. Use the original or aftermarket metal keys to remove the …

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos