Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Centre Dashboard on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Dashboard

Removing the centre dashboard on a Ford Fiesta is really simple, and this tutorial will show you how. Get a plastic prying tool and insert it into the lowest gap of the plastic surrounding the small central screen. Leverage and then move up into the side gaps, gradually extracting all the plastic while working around the area. Once done, unscrew the screws securing the air vents at the top if you want to remove them; otherwise, just unscrew the screws securing the small screen and disconnect its connector. Proceed in reverse for reassembly.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Console of the 2003 Ford Fiesta
How to Remove the Centre Console of the 2003 Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Removing a part of the dashboard of the vehicle may seem like a complex operation that requires a lot of time and effort; however, this operation is …
How to Remove the Centre Console on a Ford Fiesta
How to Remove the Centre Console on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today's guide will show you the instructions to remove and replace the centre console on a Ford Fiesta by following these simple steps. First, get in…
Removing the Centre Console on the Fiesta
Removing the Centre Console on the Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) You will see the removal of the centre console of a Ford Fiesta with all the associated parts. To begin, detach the protective trim around the gear l…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos