Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headlight on Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

Remove the two 10 mm bolts securing the front headlight in the area above the wing, on the side of the affected headlight. Then, remove the other three bolts of the headlight itself, one near the previous bolts and two at the front of the headlamp.

Detach the side area of the headlight (still in the area above the wing) and carefully extract it. Disconnect the connectors and remove the headlamp. At this point, you can proceed to install a new headlamp or extract one or more bulbs by accessing from the rear of the headlight.

This is a very simple job and within everyone's reach.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Removing the Bulbs from the Front Headlight on a Ford C Max
Removing the Bulbs from the Front Headlight on a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the blown bulbs from the front headlight on a Ford C Max, start by removing the front headlight. Open the bonnet by pulling the bonnet relea…
Removing Front Headlight on Ford C-Max
Removing Front Headlight on Ford C-Max
Ford C Max (2003-2010 / MK 1) In today's tutorial, you will learn how to remove the front headlight on a first generation Ford C-Max in simple steps. First, open and lift the car'…
How to Replace the Front Headlamp Bulb on a Ford C-Max
How to Replace the Front Headlamp Bulb on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Before starting, open the bonnet of your Ford C-Max. Begin by unscrewing and removing the screws that secure the front headlamp to the frame. Next, p…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos