Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Seat on Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Seat

Slide the front seat as far forward as possible, to the end of its travel, then unscrew the rear bolts located near the seat rails, as shown in the video (note that these bolts can be quite tough to unscrew). At this point, perform the reverse procedure, pushing the seat back and unscrewing the two front bolts. Disconnect the connector under the seat by unscrewing its securing screw. Remove the seat from the vehicle and you're done. To fit the new seat, simply reverse the process. Good luck!

Updated on 13 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Seat from a Ford Focus
Removing the Seat from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To remove the front seat from the car, let’s look at the process for a Ford Focus. Move the seat back and raise the seat base, then use a socket span…
Removing the Front Seat on a Ford Focus
Removing the Front Seat on a Ford Focus
Ford Focus (1998-2004 / MK 1) In this video tutorial, you will learn how to remove the front seats from a Ford Focus. The procedure for removing the front seat is quite similar ac…
Removing the Front Seat from a Ford Focus
Removing the Front Seat from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This guide shows how to remove the front seat from a Ford Focus. This operation can be done independently without a mechanic and takes very little ti…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos