Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlamp of a Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Headlight

In this video tutorial, you will learn how to remove the front headlamp of a first-generation Ford Transit. First, open the bonnet of the vehicle and grab a socket spanner. You will need to detach the front bumper from the sides to access the fixing screws located beneath the headlamp, and then undo the upper screws. Once this process is complete, disconnect the electrical connector of the bulbs to permanently remove the front headlamp, as shown in the video. Finally, apply the reverse procedure for reassembly!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on Ford Transit Mk7
How to Replace the Front Headlamp Bulb on Ford Transit Mk7
Ford Transit (2006-2014 / MK 7) In this guide, you will learn how to correctly replace the front headlamp bulb on your Ford Transit Mk7. Before starting, ensure the vehicle is turne…
How to Replace the Front Headlamp Bulb of the Ford Transit?
How to Replace the Front Headlamp Bulb of the Ford Transit?
Ford Transit (2014-2024 / MK 8) To replace the front headlamp bulb of the Ford Transit, open the bonnet to access the rear of the headlamp corresponding to the bulb you need to repl…
How to Replace the Headlight Bulbs on a Ford Transit Van?
How to Replace the Headlight Bulbs on a Ford Transit Van?
Ford Transit (2000-2006 / MK 6) In this tutorial, you will learn how to replace the headlight bulbs on a Ford Transit van. First, open the bonnet. For the right headlight, remove th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos