Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check and Top Up Engine Oil on Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Engine oil

In this simple video, you will see how to check the engine oil level and how to add it if necessary on a Ford Fiesta MK6. First, open the bonnet of your car by pulling the lever inside; then extract the dipstick, cleaning it with a cloth: now fully reinsert it and pull it out again, checking the oil level indicated by the marks, as shown in the video. If the level is below the maximum, proceed to top up the engine oil until you reach the specified level!

Updated on 14 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Top Up the Windscreen Washer Fluid on a Ford Fiesta
How to Top Up the Windscreen Washer Fluid on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Follow these steps to top up the windscreen washer fluid on a Ford Fiesta: Pull the plastic lever located at the bottom right of the steering wheel, …
How to Top Up Oil on a Ford Fiesta
How to Top Up Oil on a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Learn how to perform maintenance on a Ford Fiesta yourself to save on costs. To begin: pull the plastic lever located at the bottom left of the dashb…
How to Top Up the Antifreeze in a Ford Fiesta
How to Top Up the Antifreeze in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To top up the antifreeze in a Ford Fiesta, first open the bonnet. The coolant reservoir is located on the left side of the engine bay (when facing th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos