Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Car stereo

To remove the original radio, first detach the trim surrounding the radio and climate control: use a plastic lever to avoid damaging it. At this point, unscrew the fixing screws of the radio (located at the four corners) and pull it forward out of its slot. To complete the disassembly, disconnect the relevant plugs: before disconnecting, ensure you have the activation code, which may be required at the first new ignition to avoid rendering the radio unusable.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Car Radio Removal Instructions
Car Radio Removal Instructions
Ford Focus (1998-2004 / MK 1) Before proceeding with the removal of the original car radio, or possibly disconnecting the battery, ensure you have the relevant unlock code, which …
Removing the Radio from a Ford Focus
Removing the Radio from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Removing a radio from a Ford Focus? Here’s how to do it. Remove the plastic trim around the radio using a plastic lever (located beneath the radio), …
Instructions for Disassembling the Air Conditioning Control Console
Instructions for Disassembling the Air Conditioning Control Console
Ford Focus (1998-2004 / MK 1) To disassemble the central console that integrates the air conditioning controls, first remove the car radio using the appropriate extraction keys; i…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos