Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing Aftermarket Car Radio

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Car stereo

See other generations:
Video tutorial

Once you have removed the original car radio (for which you need the appropriate extraction keys), insert the fitting frame and the support bracket for the new car radio, securing it by folding down some tabs. Next, connect the adaptation wiring kit to the original system to enable the connection of the new car radio.

Then, insert the car radio into the support bracket until it clicks into place; finally, apply the trim and front panel to check its operation and adjust the audio settings.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Car Radio
Instructions for Replacing the Car Radio
Ford Focus (2004-2011 / MK 2, Focus 2) To install a new aftermarket car radio, first remove the original radio and obtain the appropriate extraction keys. You will also need an adapter to …
Removing the Stereo from a Ford Focus
Removing the Stereo from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Use original or aftermarket metal keys to remove the stereo from the Focus. Remove the buttons at the bottom of the stereo (as shown in the video), i…
Replacing the Radio in Ford Focus
Replacing the Radio in Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to install a new radio in place of the original? Let's look at the disassembly on the Ford Focus. To remove the stereo from the Focus, use the o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos