Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Headlight bulb

Before starting, open the front bonnet of your Ford Kuga. Begin by unclipping and removing the outer cover located beneath the front headlamp. Next, unscrew and remove the screws that secure the front headlamp to the car. Once done, unclip and remove the rear cover of the bulbs. Then, unscrew and remove the screws that secure the bulb to the headlamp. At this point, extract the bulb and disconnect the electrical connector, completing the removal. To install the new bulb, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb of the Ford Kuga
Replacing the Front Headlamp Bulb of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Today we will see the step-by-step instructions to remove and replace the bulb of the front headlamp of the Ford Kuga. First, open the bonnet and sta…
Replace the Headlight Bulbs on a Ford Kuga
Replace the Headlight Bulbs on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) How to replace the headlight bulbs on a Ford Kuga? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the dashbo…
Replacement of the front headlight bulb of the Ford Kuga
Replacement of the front headlight bulb of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) If the front headlight bulb of the Ford Kuga burns out, for our safety it must be replaced as soon as possible. We open the hood of the engine compar…

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos