Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Discs on a Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Brake rotors

After removing the affected front wheel, use fine pliers to extract the central bolt pin as shown in the video, and unscrew it with a 36 mm socket. At this point, tap the central pin backwards and unscrew the lower bolts to remove the brake caliper (use a crowbar for assistance). Once the caliper is moved, you can extract and replace the brake pads. Unscrew the other brake disc bolts shown in the video and knock it out of its seat with a hammer. (It requires a lot of force, both for hammering and unscrewing the bolts). Proceed in reverse for reassembly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake discs on a Ford Transit Connect van?
How to replace the front brake discs on a Ford Transit Connect van?
Ford Transit (2014-2024 / MK 8) In this tutorial, we can see how to replace the front brake discs on the Ford Transit Connect van, a very simple operation but one that requires good…
How to replace the brake pads and discs of the Ford Transit
How to replace the brake pads and discs of the Ford Transit
Ford Transit (2006-2014 / MK 7) To replace the worn brake pads of the Ford Transit mk7, it is necessary to park the vehicle on a flat surface, engage the handbrake, and lift the car…
Replacement of the rear brake pads and discs of the Ford Transit Custom
Replacement of the rear brake pads and discs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will see the instructions that will allow us to disassemble and replace the brake pads and discs of the rear brakes of the Ford Transit Cust…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos