Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ford Fiesta Cabin Filter Replacement

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Cabin air filter

The cabin air filter is located at the bottom of the dashboard on the passenger side. As shown in the video, unscrew the relevant screw that will allow you to remove the plastic cover by simply pulling it off. Disconnect the connector and unscrew the three side Torx screws, then move on to the two upper Torx screws, which are difficult to see due to their position. At this point, you can remove the plastic cover of the filter by pulling it off. Now, pull out the filter, which will gradually come out of its seat. Insert the new filter in the same manner: first insert the upper part, then slowly push the entire filter into place.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Procedure to Replace the Cabin Filter on a Ford Fiesta
Procedure to Replace the Cabin Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you can see how to remove the cabin filter on a Ford Fiesta. To perform this cabin filter replacement, you need to remove the…
Replacement of the cabin filter of the Ford Fiesta
Replacement of the cabin filter of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To prevent dust and dirt from entering the ventilation system of the Ford Fiesta, a filter has been placed on the intake, which we must periodically …
Replacing the Cabin Filter on a Ford Fiesta
Replacing the Cabin Filter on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, let's see how to replace the cabin filter on a sixth-generation Ford Fiesta. Start by removing the protective panel under the passenger side g…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos