Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fuel Pump on a Ford Ka mk1

Model: Ford Ka MK 1 - Years 1996-2008
Part: Fuel pump

Of course, this operation must be carried out with the tank completely empty. Lift the car and work from underneath to access the fuel pump. Without removing the silencer, slightly bend the section of the exhaust shown by the arrow. Using a 6 mm spanner, unscrew the clamp bolt of the fuel inlet pipe and the breather pipe. As shown in the video, unscrew the 4 bolts of 13 mm that secure the tank after placing a stand underneath it, disconnecting the remaining pipes. Then remove the red conduit going to the pump, and you will finally be able to extract it from its housing.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Ka (1996-2008 / MK 1) Briefly, we will see the steps necessary to remove and replace the fuel filter of the Ford KA, following the instructions below. First, raise the veh…
Ford Ka (1996-2008 / MK 1) In today's tutorial video, you will learn how to open or close the fuel tank cap on a second-generation Ford Ka in simple steps. Sometimes, even the …
Ford Ka (2016-2019 / MK 3) To open the fuel flap on a Ford Ka Plus, locate the lever that unlocks the actuator of its lock: this lever is located just under the driver's seat a…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos