Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank Float on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Fuel pump

How do you remove the fuel pump float on a Ford Kuga? This operation is not too difficult; follow these steps to disassemble the part. Remove the rear seat cushions from the car. Use a socket spanner to undo the screws securing the cover cap of the tank, then lift it out of its seat (pull down the tank if necessary). Use absorbent paper around the perimeter to soak up any liquid leaks. Use a chisel to undo the large securing pin of the fuel pump: disconnect the power connectors and the liquid circulation hoses. Replace the float pump inside the tank with a new one.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on a Ford Kuga 2.0 TDCi
Guide to Replacing the Timing Belt on a Ford Kuga 2.0 TDCi
Ford Kuga (2008-2012 / C394, MK 1) Today we will see the instructions to remove and replace the timing belt on the Ford Kuga 2.0 TDCi. First, open the engine bonnet and begin by removi…
Replacing the Battery in a Ford Kuga
Replacing the Battery in a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today, let's go through the instructions on how to remove and replace the battery in a Ford Kuga by following these simple steps. First, open the bon…
Replacing the Oil Filter on Ford Kuga
Replacing the Oil Filter on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, we will see how to remove the oil filter on a second-generation Ford Kuga. The oil filter is located under the vehicle: so li…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos