Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter of a Ford Focus?

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter of the Ford Focus, open the bonnet to access the engine bay and unscrew the screws of the plastic cover located immediately under the windscreen on the passenger side. By removing the plastic cover, you can slide out the cabin filter and clean its housing with a blast of compressed air. At this point, you can insert the new pollen filter into the designated slot.

After completing the operation, refit the cover by securing it again with the screws previously removed.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on Focus
How to Replace the Pollen Filter on Focus
Ford Focus (1998-2004 / MK 1) Removing the cabin air filter on Focus? Remove the filter and replace it with a new one. Open and lift the engine bonnet, unclip the securing clips l…
How to Replace the Cabin Filter on the Ford Focus 2013
How to Replace the Cabin Filter on the Ford Focus 2013
Ford Focus (2011-2018 / MK 3) If the cabin air filter in your Ford Focus Mk3 (2013) shows excessive signs of wear, it’s time to replace it. Carefully read the following guide and …
How to Replace the Cabin Filter of the Ford Focus 2007
How to Replace the Cabin Filter of the Ford Focus 2007
Ford Focus (2004-2011 / MK 2, Focus 2) In this new guide, you will learn how to correctly change the cabin air filter in your Ford Focus Mk2 (2007). First, ensure the car is turned off, th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos