Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the cabin filter on Ford Focus 2013

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Cabin air filter
Operation: How to replace the cabin filter on Ford Focus 2013

If the cabin air filter inside your Ford Focus third series (year 2013) shows excessive signs of wear and it is time to replace it, just read the following guide carefully and put into practice the various steps described. First make sure you have safely parked your car and turn it off completely. Then reach the passenger side and proceed with the removal of the panel located in the lower area of the glove compartment. Immediately after, remove the cover on the left side and replace the old filter with the new one.


Posted on 10 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the cabin filter on the Ford Focus located? Read Answer
    • Focus 2004-2011 - Where is the cabin air filter located on the Ford Focus MK2? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus pollen filter located? Read Answer
    • Focus 2018-2025 - Where is the cabin filter located on my 2019 Ford Focus? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus 1.6 cabin air filter located? Read Answer
    • Focus 1998-2004 - Where is the air conditioning cabin filter Ford Focus 3rd series Read Answer
    • Focus 1998-2004 - Where is the cabin filter of the Ford Focus I? Read Answer
    • Focus 2004-2011 - Where do you find the Ford Focus II cabin air filter? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos