Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : How to replace the cabin filter in the Ford Focus 3.

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Air filter
Operation: How to replace the cabin filter in the Ford Focus 3.

As explained in the video, to replace the cabin filter in your Ford Focus 3, position yourself on the passenger side and release the interior panel of the car by unscrewing the two screws. In the far left corner, you will find several compartments. Apply pressure to the first filter on the right until it comes out. You can now remove the air filter from the Ford Focus. Insert the new K 1350 filter and close it with its cover. Finally, reattach the interior panel by securing the screws as shown in the video, and the operation is complete.


Posted on 24 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the Ford Focus III engine air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos