Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Engine air filter replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Air filter
Operation: Engine air filter replacement

Open the front hood and intercept the air filter container: it is located in the front right part of the engine compartment (looking from the front), near the battery; unscrew the four fixing screws of the filter container cover (the screws do not come off), remove it and extract the old filter by first lifting the right side; clean the container of any residues present. To apply the new filter, first insert the left side and then the right side making sure that it fits correctly in its seat. Finally reposition the cover and tighten the relative fixing screws.


Posted on 20 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the Ford Focus III engine air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos