Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Fuel injectors

In this video tutorial, you will learn how to remove and replace the diesel injectors on the sixth series Ford Fiesta with a 1.6 TDCI engine. First, open the bonnet and remove the plastic engine cover; then disconnect the electrical connectors of the injectors, moving the wiring aside. At this point, use a hex key to unscrew and remove the injectors by pulling them upwards; you can then proceed with cleaning or direct replacement. Finally, reassemble everything, following the video tutorial to the end!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the injectors on a Ford Fiesta 1.6 TDCi, open the bonnet to access the components at the top of the engine block after removing the plasti…
How to Remove the Injectors from the Ford Fiesta 1.4 TDCi
How to Remove the Injectors from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide provides the main instructions for removing and replacing the fuel injectors of the Ford Fiesta 1.4 TDCi. First, open the bonnet of your c…
Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video tutorial, see the main steps to remove the diesel injectors and their copper washers (which often cause leaks) from the Ford Fiesta …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What is the tightening torque of the Ford Fiesta 1.4 TDCi injectors? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos