Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Injectors from the Ford Fiesta 1.4 TDCi

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Fuel injectors

This guide provides the main instructions for removing and replacing the fuel injectors of the Ford Fiesta 1.4 TDCi. First, open the bonnet of your car and start by removing the intake hose and the air filter box by unscrewing the screws; then remove the pipes located above the cylinder head, disconnecting the electrical connectors of the coils. Next, unscrew the screws of the valve cover to access the injectors (located just behind the block); unscrew these to remove them, replacing them with new ones if necessary.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the injectors on a Ford Fiesta 1.6 TDCi, open the bonnet to access the components at the top of the engine block after removing the plasti…
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove and replace the diesel injectors on the sixth series Ford Fiesta with a 1.6 TDCI engine. First, …
Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video tutorial, see the main steps to remove the diesel injectors and their copper washers (which often cause leaks) from the Ford Fiesta …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What is the tightening torque of the Ford Fiesta 1.4 TDCi injectors? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos