Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Tailgate Light on a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

Open the tailgate. Remove the protective cover of the tailgate handle using a small flat screwdriver or a plastic trim tool.

Remove the handle by unscrewing the two side screws. Using the same trim tool, detach the two main plastic covers of the tailgate as shown in the video.

At this point, unscrew the exposed 8 mm bolt that secures the light. Close the tailgate and proceed to remove the light.

Now unscrew the bulb housing to remove it from the structure and replace the bulb itself. Reassemble by reversing the steps.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Removing the Inner Panel of the Ford Ecosport Boot
Ford Ecosport (2012-2023 / BK, MK 1) How to remove the cover panel of the rear boot of the Ford Ecosport? Follow these steps to detach the cover panel from the top of the boot. Remove th…
How to Remove the Rear Door Panel of a Ford Ecosport
How to Remove the Rear Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the rear door of your Ford Ecosport. Begin by disengaging and removing the inserts from the door panel. Next, unscrew and …
How to Replace the Tailgate Lock on a Ford Ecosport
How to Replace the Tailgate Lock on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this brief and simple guide, you will find instructions on how to dismantle and replace the tailgate lock or boot lock on a Ford Ecosport. First, …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos