Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on the Ford Fiesta ST MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

In this guide, we will see the main steps to remove the front bumper on the sixth generation Ford Fiesta, in the ST version, following the instructions below. First, open the bonnet and start by unscrewing the fixing screws located at the top of the bumper using a Torx key; then unscrew the screws from the headlights to remove them, disconnecting the electrical connectors of the bulbs.

At this point, unscrew the additional screws found on both sides of the wheel arches and under the bumper; gently unclip the bumper from the sides to remove it!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper from the Ford Fiesta
Removing the Front Bumper from the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this brief and simple guide, learn how to remove and replace the front bumper of the Ford Fiesta by following the instructions below. First, open …
How to Remove the Front Bumper on a Ford Fiesta?
How to Remove the Front Bumper on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this tutorial, see how to remove the front bumper on a Ford Fiesta, a very simple and quick operation. First, unscrew the bolts located inside the…
How to Replace the Front Bumper of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video tutorial, you can see how to replace the front bumper of the Ford Fiesta. Start by lifting the front of the vehicle with a hydraulic ja…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos