Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Ford Focus, do not perform any operations with the buttons on the steering wheel or near the instrument panel. Consult the recommended pressure values, which are written on the sticker affixed to the lower part of the driver’s door pillar. Tyres with insufficient inflation pressure must be inflated to the pressure indicated on the sticker. Once the tyres are inflated, go inside the cabin and check that the sensors have registered the new pressure values.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Ford Focus?
How to Reset the Tyre Pressure Light on a Ford Focus?
Ford Focus (2018-2025 / MK 4) You can completely clear the tyre pressure light on a Ford Focus by inflating the tyres until they reach the optimal pressure value: this will be ind…
How to Reset the Tyre Pressure Warning Light on a Ford Focus?
How to Reset the Tyre Pressure Warning Light on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tyre pressure warning light on a Ford Focus, first ensure all tyres are inflated to the recommended pressure: this value is indicated on…
How to Reset the Tyre Pressure Light on a Ford Focus
How to Reset the Tyre Pressure Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this short video tutorial, you can see how to reset the tyre pressure light, or TPMS light, on a third-generation Ford Focus, produced from 2011 t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos