Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tire pressure warning light

Follow this guide for instructions to reset the tyre pressure warning light on the Ford Focus. First, get in the vehicle and turn on the instrument panel; then navigate to the settings in the onboard computer menu using the controls on the steering wheel until you reach the tyre pressure option, as shown in the video. At this point, the computer will prompt you to press the "ok" button to confirm and execute the reset of the TPMS sensor; exit the menu and check that the warning light has been reset!

Updated on 17 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Tyre Pressure Light on the Ford Focus 4
How to Reset the Tyre Pressure Light on the Ford Focus 4
Ford Focus (2018-2025 / MK 4) Watch this video to see how to reset the tyre pressure light on the fourth generation Ford Focus in simple steps; before resetting the light, ensure …
How to Reset the Tyre Pressure Light on a Ford Focus MK3
How to Reset the Tyre Pressure Light on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) This guide explains how to reset the tyre pressure light on a third-generation Ford Focus; before performing the steps, ensure all four tyres are at …
How to Reset the Tyre Pressure Light on the Ford Focus?
How to Reset the Tyre Pressure Light on the Ford Focus?
Ford Focus (2018-2025 / MK 4) In this tutorial, you will see how to reset the tyre pressure light on the Ford Focus, a very simple and quick operation that should be done only aft…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos