Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Door Handle on a Ford Explorer

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Handle

To replace the external door handle on a Ford Explorer, first remove the door panel. This can be done by loosening the screws located under the armrest trim on the panel. Once removed, detach the inner door panel to access the actuator; this must be removed from its housing by loosening its bolts. Consequently, the external handle can be pulled out from the outside and replaced with a new one; finally, reassemble all the removed components.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Door Handle on the Ford Explorer MK2
How to Replace the External Door Handle on the Ford Explorer MK2
Ford Explorer (1995-2001 / MK 2, Un105, Un150) Follow these simple steps to remove and replace the external door handle on the second series Ford Explorer. First, remove the door panel by taking o…
How to replace the outer handle of the Ford Explorer Mk4
How to replace the outer handle of the Ford Explorer Mk4
Ford Explorer (2006-2010 / U251, MK 4) This guide shows how to replace the outer door handle of the Ford Explorer Mk4. The first step is to remove the two trim panels on the side of the sw…
How to Replace the External Door Handle on a Ford Explorer
How to Replace the External Door Handle on a Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) In this guide, follow the instructions to remove and replace the external door handle on the front door of a Ford Explorer. First, open the front doo…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos