Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Sun Visor on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Checks and maintenance

Is the sun visor on your Fiesta damaged? Here’s how to remove it from inside the cabin. Unlock the sun visor and move it to the right or left of the door. Release the locking plastic of the sun visor. Use a screwdriver to remove the securing screws of the lever mounts (left or right side), disconnect the power connector if applicable. Remove all securing screws between the sun visor and the roof panel. Connect the electrical connector for the courtesy light. Open and close the sun visor to perform a control test.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Vent on Ford Fiesta
Removing the Air Vent on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Let's remove the air vent from a Ford Fiesta. Enter the vehicle, and using a plastic or metal spatula, pry upwards (levering) the plastic air vent lo…
Removing the Rear Light of a Ford Fiesta
Removing the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide covers the removal of the rear light of a Ford Fiesta. It's a simple task; open the boot lid, and using a screwdriver, unscrew the securin…
Removing the Air Vents from a Ford Fiesta
Removing the Air Vents from a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Remove the air vents from a Ford Fiesta. Follow this guide to proceed with the removal. Use a plastic lever to detach the upper and lower trims of th…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos